#
# Natural Docs Default Language File, English (United States)
#
# To create a new language file, copy this one and rename it to replace
# "default" with the locale code in all lowercase, such as 
# "NaturalDocs.CLI.en-us.txt".  You can also omit the extension to have it apply
# to all locales in that language, such as "NaturalDocs.CLI.en.txt".  They
# inherit from each other, so anything not found in NaturalDocs.CLI.en-us.txt
# will be taken from NaturalDocs.CLI.en.txt, and if it's not in there, from 
# NaturalDocs.CLI.default.txt.
#

# This file is part of Natural Docs, which is Copyright © 2003-2021 Code Clear LLC.
# Natural Docs is licensed under version 3 of the GNU Affero General Public License (AGPL)
# Refer to License.txt for the complete details



#
# Status Messages
#______________________________________________________________________________


Status.Start(version): Natural Docs {0}
Status.End: Done.

Status.StartFileSearch: Searching for files...
Status.FileSearchUpdate(files, folders): ...{0:#,0} source {0s?files:file} in {1:#,0} {1s?folders:folder} so far
Status.EndFileSearch(files, folders): Found {0:#,0} source {0s?files:file} in {1:#,0} {1s?folders:folder}.

Status.RebuildEverythingByRequest: All documentation will be rebuilt.  Parsing files...
Status.RebuildEverythingAutomatically: All documentation needs to be rebuilt.  Parsing files...
Status.StartFileParsing(changed): {0:#,0} {0s?files:file} changed.  Parsing...
Status.StartFileParsing(changed, deleted): {0:#,0} {0s?files:file} changed, {1:#,0} deleted.  Parsing...
Status.StartFileParsing(deleted): {0:#,0} {0s?files:file} deleted.  Updating...
Status.FileParsingUpdate(percent): ...{0}% complete
Status.NoChanges: No changes detected.

Status.StartLinkResolving: Resolving links...
Status.LinkResolvingUpdate(percent): ...{0}% complete

Status.StartOutputBuilding: Building documentation...
Status.OutputBuildingUpdate(percent): ...{0}% complete

Status.LongStartupOperation.StartPurgingOutputWorkingData: Deleting old working data...
Status.LongStartupOperation.StartPurgingOutputFiles: Deleting old documentation...
Status.CreatingProjectConfigFiles: Creating project configuration files...

Status.BenchmarksSavedIn(file): Benchmarks saved in {0}.
Status.CouldNotSaveBenchmarksIn(file): Could not save benchmarks in {0}.

Status.PressAnyKeyToContinue: Press any key to continue...

Encodings.CodePage: Code Page
Encodings.Name: Name
Encodings.Description: Description
Encodings.UnicodeDescription: Unicode auto-detect (UTF-8, UTF-16, UTF-32)

Encodings.MissingDescriptions.multiline {{{
It looks like your system doesn't provide descriptions for every encoding.
You can find descriptions of them at these sites:

https://docs.microsoft.com/en-us/windows/win32/intl/code-page-identifiers

https://en.wikipedia.org/wiki/Windows_code_page
}}}



#
# Command Line
#______________________________________________________________________________


CommandLine.ErrorsInFile(file): There are errors in {0}:
CommandLine.Line: Line

CommandLine.ExpectedNoValue(param): {0} cannot be followed by a value.
CommandLine.ExpectedNumber(param): {0} must be in the form "{0} [number]".
CommandLine.ExpectedFolder(param): {0} must be in the form "{0} [folder]".
CommandLine.ExpectedFormatAndFolder(param): {0} must be in the form "{0} [format] [folder]".
CommandLine.ExpectedPattern(param): {0} must be in the form "{0} [pattern]".
CommandLine.ExpectedStyleName(param): {0} must be in the form "{0} [style name]".
CommandLine.UnrecognizedParameter(param): {0} is not a valid parameter.
CommandLine.UnrecognizedOutputFormat(format): {0} is not a valid output format.
CommandLine.OnlyOneProjectConfigFolder: You may only specify one project configuration folder.
CommandLine.OnlyOneWorkingDataFolder: You man only specify one working data folder.
CommandLine.NoProjectConfigFolder: You must define a project configuration folder.
CommandLine.InvalidTabWidth: The tab width must be a number greater than zero.
CommandLine.InvalidWorkerThreadCount: The worker thread count must be a number greater than zero.
CommandLine.HowToGetCommandLineRef: Run Natural Docs with -h to see the command line reference.
CommandLine.NoLongerSupported(param): {0} is no longer supported.
CommandLine.NoLongerSupported.HeadersOnly(param): {0} is no longer supported.  Use Languages.txt to exclude the source file extensions instead.
CommandLine.NoLongerSupported.AutoGroup(param): {0} is no longer supported.  Use --no-auto-group if you want to turn off automatic grouping.


CommandLine.SyntaxReference(version).multiline {{{
Natural Docs, version {0}
http://www.naturaldocs.org
This program is licensed under the AGPL
---------------------------------------

Syntax:

    NaturalDocs [project configuration folder] [additional options]

    NaturalDocs -i [input (source) folder]
                -p [project configuration folder]
                -o [output format] [output (documentation) folder]
                [additional options]

Examples:

    NaturalDocs C:\My Project\Natural Docs Config
    
    NaturalDocs -i /project/src
                -p /project/ndconfig
                -o html /project/doc


Folder Parameters:
------------------

 -p [folder]
--project-config [folder]
    Specifies the folder that stores the configuration files Natural Docs will
    use for this project.  Required.  If the folder is empty Natural Docs will
    generate the configuration files for you.

 -i [folder]
--input [folder]
--source [folder]
    Specifies an input folder, which is where your source code is.  Required
    either on the command line or in Project.txt.  Can be specified multiple
    times.

 -o [format] [folder]
--output [format] [folder]
    Specifies an output format and folder, which is where your generated
    documentation will go.  Currently the only supported format is HTML.
    Required either on the command line or in Project.txt.  Can be specified
    multiple times.

 -xi [folder]
--exclude-input [folder]
--exclude-source [folder]
    Excludes an input folder.  Natural Docs will not search it or its
    subfolders for code.  Can be specified multiple times.

 -xip [pattern]
--exclude-input-pattern [pattern]
--exclude-source-pattern [pattern]
    Excludes input folders by a pattern, which can include * and ? wildcards.
    Can be specified multiple times.  The pattern must match an entire folder
    name, so "cli" will not match "client", but "cli*" would.

 -img [folder]
--images [folder]
    Specifies an images folder.  Files inside it can be referenced in comments
    with (see filename.jpg).  Can be specified multiple times.

 -w [folder]
--working-data [folder]
    Specifies a folder to store temporary data.  If not specified it will be a
    subfolder of the project configuration folder.


Common Parameters:
------------------

 -s [style]
--style [style]
    Specifies the output style to use.  See
    https://naturaldocs.org/reference/styles for more information.

 -t [width]
--tab-width [width]
    Specifies how many spaces a tab should be expanded to.

 -do
--documented-only
    Only include documented code elements in the output.

 -nag
--no-auto-group
    Turns off automatic grouping.  Topics will only be grouped in the output
    when you manually add Group comments.

 -r
--rebuild
    Rescans every source file and rebuilds all the output.

 -ro
--rebuild-output
    Rebuilds all the output without rescanning the source.

 -q
--quiet
    Suppresses all non-error output.

--pause
--pause-before-exit
    Require keyboard input before exiting the program.  Only use this if you
    are running Natural Docs in a pop-up console window that closes
    automatically and you would like to see the output before that happens.

--pause-on-error
    Require keyboard input before exiting the program if there is an error.
    Only use this if you are running Natural Docs in a pop-up console window
    that closes automatically and you would like it to stay open if there are
    error messages.

 -v
--version
    Displays the current version of Natural Docs.

 -vs
--versions
--all-versions
    Displays the current version of Natural Docs and all supporting systems
    like .NET or Mono.

--encodings
--list-encodings
    Displays all the character encodings that are available on the current
    system.

 -?
 -h
--help
    Displays this command line reference.


Technical Parameters:
---------------------

--worker-threads
    Sets the number of worker threads Natural Docs should use for processing.
    By default it is calculated based on the number of cores present.

--benchmark
    Collects and displays statistics on how long it takes Natural Docs to
    execute.

--dont-shrink-files
    Leave whitespace and comments in CSS and JavaScript output files.  Makes
    it easier to debug JavaScript in the browser.
}}}



#
# Crash Messages and Report
#______________________________________________________________________________


Crash.Exception: Natural Docs has stopped because of the following error:
Crash.IncludeInfoAndGetHelp: Please include this information when asking for help at naturaldocs.org.

Crash.ReportAt(file).multiline {{{
A crash report has been generated at {0}.
Please include this file when asking for help at naturaldocs.org.
}}}

